No I had one done which was 125pixels.busrider wrote:Maximum dimensions; width: 150 pixels, height: 150 pixels, file size: 97656.25 KiB.
The maximum width is 150 pixels, and that desto is 300 pixels wide. Hence not within the size limits.
Using Mobi Info Edit (MIE)
Moderator: MAN 16.242
Forum rules
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
-
- Moderator
- Posts: 5810
- Joined: Sat Jun 06, 2009 12:18 pm
- Favourite Vehicle: Anything German
- Location: Sydney, NSW
Re: Using Mobi Info Edit (MIE)
- busrider
- Administrator
- Posts: 2388
- Joined: Fri Jun 20, 2008 11:35 pm
- Favourite Vehicle: Maybe not my car...
- Location: Not in the Gutta
Re: Using Mobi Info Edit (MIE)
Seems to work for me...
-
- Moderator
- Posts: 5810
- Joined: Sat Jun 06, 2009 12:18 pm
- Favourite Vehicle: Anything German
- Location: Sydney, NSW
Re: Using Mobi Info Edit (MIE)
This is what it comes up with.
The submitted avatar is 125 pixels wide and 18 pixels high. Avatars must be at least 20 pixels wide and 20 pixels high, but no larger than 150 pixels wide and 150 pixels high.
The submitted avatar is 125 pixels wide and 18 pixels high. Avatars must be at least 20 pixels wide and 20 pixels high, but no larger than 150 pixels wide and 150 pixels high.
- busrider
- Administrator
- Posts: 2388
- Joined: Fri Jun 20, 2008 11:35 pm
- Favourite Vehicle: Maybe not my car...
- Location: Not in the Gutta
Re: Using Mobi Info Edit (MIE)
Well then, it's under the minimum requirement... Make it a few pixels taller...
-
- Moderator
- Posts: 5810
- Joined: Sat Jun 06, 2009 12:18 pm
- Favourite Vehicle: Anything German
- Location: Sydney, NSW
Re: Using Mobi Info Edit (MIE)
Thanks but I prefer to use a more realistic desto type etc...Nathan wrote:Here is a reformatted route 66 desto. Just save it and use as your avatar if you want to. It is within the limits.
Would it work if it was on the exact maximum?busrider wrote:Well then, it's under the minimum requirement... Make it a few pixels taller...
- busrider
- Administrator
- Posts: 2388
- Joined: Fri Jun 20, 2008 11:35 pm
- Favourite Vehicle: Maybe not my car...
- Location: Not in the Gutta
Re: Using Mobi Info Edit (MIE)
Theoretically, yes... Only way to find out is to try that for yourself.
- RailwayBus
- Posts: 4356
- Joined: Wed May 21, 2008 9:40 am
- Favourite Vehicle: Train or tram.
- Location: Melbourne
Re: Using Mobi Info Edit (MIE)
Not to mention he added an "s" onto "Limited Stop" anyway.Mr OC Benz wrote:Thanks but I prefer to use a more realistic desto type etc...Nathan wrote:Here is a reformatted route 66 desto. Just save it and use as your avatar if you want to. It is within the limits.
(It might make more sense as "limited stops" but its not the Perth way )
All views expressed are strictly my own and do not represent my employer or anyone else.
- busrider
- Administrator
- Posts: 2388
- Joined: Fri Jun 20, 2008 11:35 pm
- Favourite Vehicle: Maybe not my car...
- Location: Not in the Gutta
Re: Using Mobi Info Edit (MIE)
He forgot to put the word "via" on its own scroll... The Perth way!
-
- Moderator
- Posts: 5810
- Joined: Sat Jun 06, 2009 12:18 pm
- Favourite Vehicle: Anything German
- Location: Sydney, NSW
Re: Using Mobi Info Edit (MIE)
It doesn't need a "via" unless I was to add via Beaufort Street but thats not needed.busrider wrote:He forgot to put the word "via" on its own scroll... The Perth way!
- RailwayBus
- Posts: 4356
- Joined: Wed May 21, 2008 9:40 am
- Favourite Vehicle: Train or tram.
- Location: Melbourne
Re: Using Mobi Info Edit (MIE)
But then he'd also have to add a place that its running via??busrider wrote:He forgot to put the word "via" on its own scroll... The Perth way!
Can't just have via without a place.
All views expressed are strictly my own and do not represent my employer or anyone else.
-
- Moderator
- Posts: 5810
- Joined: Sat Jun 06, 2009 12:18 pm
- Favourite Vehicle: Anything German
- Location: Sydney, NSW
Re: Using Mobi Info Edit (MIE)
Swan Transit in Perth do... The next slide has where it via's by...
-
- Moderator
- Posts: 5810
- Joined: Sat Jun 06, 2009 12:18 pm
- Favourite Vehicle: Anything German
- Location: Sydney, NSW
Re: Using Mobi Info Edit (MIE)
Sweet it worked. Thanks busrider!
- hino rg
- Posts: 276
- Joined: Thu Dec 31, 2009 6:11 am
- Favourite Vehicle: Hino RG 197K m/o 9020
- Location: Somewhere around Adelaide
Re: Using Mobi Info Edit (MIE)
soulblade wrote:printscreen each slide, then link together as gif
HOW do you do that
volvo B10M are the best bus ever made
- VivalaBuses
- Posts: 1193
- Joined: Sat Mar 28, 2009 4:50 pm
- Favourite Vehicle: Scania K310UB, Volvo B7RLE
- Location: Where buses in TfNSW livery run!
Re: Using Mobi Info Edit (MIE)
Seeing as you have a desto avatar already, I have no idea why you're even asking this questionhino rg wrote:soulblade wrote:printscreen each slide, then link together as gif
HOW do you do that
On your keyboard, there is a button that has "Print Screen" on it. Press that and then open up Paint. Press Ctrl + V, and save that image. Repeat this step until you have all the slides.
Now you crop the individual slides. Open up Microsoft Office Picture Manager and open one of the slides. Click on "Edit Picture..." then "Crop". Move the handlebars so that you are left with the desto slide, then save. Repeat this step for every slide.
Go to Gickr (www.gickr.com) where you can upload those slides where it will make it as a GIF image for you
Time for a new signature!
- hino rg
- Posts: 276
- Joined: Thu Dec 31, 2009 6:11 am
- Favourite Vehicle: Hino RG 197K m/o 9020
- Location: Somewhere around Adelaide
Re: Using Mobi Info Edit (MIE)
thanks i need someone to show me how do it and i did not make dis one someone eles did i want to make my own 1
volvo B10M are the best bus ever made
- National Link
- Posts: 999
- Joined: Wed Dec 26, 2007 8:17 pm
- Favourite Vehicle: DVR Locos CL 9-Q and BL 26-E
- Location: Somewhere in the Real World!
Re: Using Mobi Info Edit (MIE)
Hi guys,
Sorry to bring this back to the top, but I'm experiencing issues with Zedit 32. After I have programmed all my destos in, I go to use the "Sign Simulation" function, and instead of it opening, it instead brings me back to the programming screen, and reprograms all of my route numbers, regardless of whatever they were. EG 900 would become 903 without being programmed.
Has anyone being experiencing problems similiar to mine?
Sorry to bring this back to the top, but I'm experiencing issues with Zedit 32. After I have programmed all my destos in, I go to use the "Sign Simulation" function, and instead of it opening, it instead brings me back to the programming screen, and reprograms all of my route numbers, regardless of whatever they were. EG 900 would become 903 without being programmed.
Has anyone being experiencing problems similiar to mine?
One Thousand ATDB Posts Can't Be Wrong.
Any views expressed are my own and do not reflect any views of my employers.
Any views expressed are my own and do not reflect any views of my employers.
- VivalaBuses
- Posts: 1193
- Joined: Sat Mar 28, 2009 4:50 pm
- Favourite Vehicle: Scania K310UB, Volvo B7RLE
- Location: Where buses in TfNSW livery run!
Re: Using Mobi Info Edit (MIE)
I haven't experienced what you have described there entirely. It has only happened to me up to returning to the programming screen, but the destos don't get scrambled. Have you tried saving your work, closing ZEdit32, reopening the program, opening your work then using sign simulation? It shouldn't go wrong this way
Time for a new signature!
- Daz
- Posts: 1088
- Joined: Fri May 29, 2009 1:44 am
- Favourite Vehicle: 4964F Heritage
- Location: The Hawkesbury
Re: Using Mobi Info Edit (MIE)
It only took me four months to work out why it didn't work: we were looking too small, not large.Mr OC Benz wrote:The submitted avatar is 125 pixels wide and 18 pixels high. Avatars must be at least 20 pixels wide and 20 pixels high, but no larger than 150 pixels wide and 150 pixels high.
Daz
Did you hear the scarecrow got an award? He was out standing in his field.
- Transperthpaperbus
- Posts: 536
- Joined: Mon Mar 08, 2004 11:06 pm
- Location: Gnangara, Western Australia
- Contact:
Re: Using Mobi Info Edit (MIE)
I am having problems with my MIE program and I have done the repair but it is still giving problem. I have forgotten the web address to download it, so can anybody please in that regard so that I can make sure that I can get a version which is working properly without errors.
Looking to getting more Transperth bus, train and ferry models made up through Transit Graphics.
Currently driving for The Transporter & Buswest Wangara.
Currently driving for The Transporter & Buswest Wangara.
Re: Using Mobi Info Edit (MIE)
Here mine desto as 900 Liverpool
Re: Using Mobi Info Edit (MIE)
Would like to share other desto of m92 here:
- VivalaBuses
- Posts: 1193
- Joined: Sat Mar 28, 2009 4:50 pm
- Favourite Vehicle: Scania K310UB, Volvo B7RLE
- Location: Where buses in TfNSW livery run!
Re: Using Mobi Info Edit (MIE)
Nice attempt, but I've noticed the M of M92 dances around
Time for a new signature!
Re: Using Mobi Info Edit (MIE)
Other desto of m90, Which was replaced 900 last year.
& m60 which replaced 600 this year.
& m60 which replaced 600 this year.
Last edited by bus909 on Sat Apr 23, 2011 6:04 pm, edited 3 times in total.
Re: Using Mobi Info Edit (MIE)
soulblade wrote:Nice attempt, but I've noticed the M of M92 dances around
Yeah, But somehow bankstown and padstow with m92 same, but if via lidcombe it dance around..
- citadis203
- Posts: 285
- Joined: Thu Oct 28, 2010 5:52 pm
- Favourite Vehicle: 4000 Railcar
- Location: Adelaide Oval
Re: Using Mobi Info Edit (MIE)
I seen destos with signs(eg.cityrail logo)
Can you make a picture into the desto??
Can you make a picture into the desto??