Hi,
I recently got a MobiDOT display and an ICU 400 but I cannot find a way to program it. I have been searching quite a bit and I have found Mobi Info Edit and Zedit. However, I cannot get MIE activated to create an outfile and an outfile made with Zedit gives me an error code 10 'Invalid first byte' on the connect box. Is there any way to get either of those programs to work or is there another way to program the ICU 400?
Thanks in advance.
MobiDOT display with ICU 400
Moderator: MAN 16.242
Forum rules
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
-
- Posts: 0
- Joined: Mon Jul 26, 2021 7:57 am
Re: MobiDOT display with ICU 400
Alright, I got Mobi Info Edit to work and I can now create outfiles. Another question, when I write a new outfile to the ICU 400, does it wipe all of the destinations in the current program? The unit I have still has a lot of the original destination blinds on it and I would like to keep them if possible.
Re: MobiDOT display with ICU 400
Yes, when you upload a new outfile, it will overwrite the old outfile.the_real_mcarn wrote: ↑Fri Jul 30, 2021 7:52 am Alright, I got Mobi Info Edit to work and I can now create outfiles. Another question, when I write a new outfile to the ICU 400, does it wipe all of the destinations in the current program? The unit I have still has a lot of the original destination blinds on it and I would like to keep them if possible.
- enzomatrix
- Posts: 0
- Joined: Thu Nov 11, 2021 7:08 pm
Re: MobiDOT display with ICU 400
How did you get MIE to work?
It is saying I cannot create an output file in evaluation mode...
I just bought a MC 0405NH with the ICU 400
It is saying I cannot create an output file in evaluation mode...
I just bought a MC 0405NH with the ICU 400
- High Floor Bus
- Posts: 878
- Joined: Sun Aug 08, 2010 1:23 am
- Favourite Vehicle: Olden Holdens
- Location: Sitting behind a wheel thingy where all the lights & switches are.
Re: MobiDOT display with ICU 400
You need a licence key to unlock from evaluation mode .
The whole World is going to "HELL" And I'm driving the Bus!
Go ESSENDON for 2022
Proud owner of Preserved Merc Benz O405 679,688,689,691 &1101& Renaults 602 626 647 & 1119
Go ESSENDON for 2022
Proud owner of Preserved Merc Benz O405 679,688,689,691 &1101& Renaults 602 626 647 & 1119
- enzomatrix
- Posts: 0
- Joined: Thu Nov 11, 2021 7:08 pm
Re: MobiDOT display with ICU 400
Thanks @highfloorbus
Any ideas on how to get one? I have been trying to contact Mobitec for weeks.
Any ideas on how to get one? I have been trying to contact Mobitec for weeks.