• Advertisement

Renk Auto

Discussions regarding bus to motorhome conversions are welcome here.

Renk Auto

Postby Romen2 » Thu May 21, 2015 6:35 am

Hoping to get some info in reference to changing the output shaft seal on our transmission. We have a MAN SL200 83 model.
The seal has started to weep and I have been able to source a replacement through Multi Spares, my question is does anyone know how the output shaft is held in e.g. cir clip, nut and washer ect

Cheers
Russell
DOING IT OUR WAY!
Romen2
 
Posts: 2
Joined: Tue May 29, 2012 7:23 pm
Has thanked: 1 time
Been thanked: 1 time

Re: Renk Auto

Postby Wildcatracing » Fri May 22, 2015 5:07 am

we had the yoke work loose and from memory its held in by a large castle nut, cant remember if there was a split pin holding it - dont think so
Wildcatracing
 
Posts: 5
Joined: Tue Jul 27, 2010 10:22 am
Has thanked: 0 time
Been thanked: 2 times

Re: Renk Auto

Postby Guy_Arab » Fri May 22, 2015 9:00 am

Wildcatracing wrote:we had the yoke work loose and from memory its held in by a large castle nut, cant remember if there was a split pin holding it - dont think so

I have RANK Manual but it is in German have not finished translate it but contact me PM
Guy Arab
User avatar
Guy_Arab
 
Posts: 702
Joined: Sat Mar 06, 2004 9:11 pm
Location: Perth W.A.
Has thanked: 1 time
Been thanked: 34 times
Favourite Vehicle: M.A.N Bus & Guy Arab



  • Advertisement

Return to Bus to motorhome discussions

Who is online

Users browsing this forum: No registered users and 4 guests