Hi All,
I am trying to establish if the rubber seal used on the side window fixed pane (under the sliding windows) is a one piece seal or is in two pieces, being the top horizontal piece with the second piece doing the sides and the bottom. I am hesitant to pull one out at this stage and am calling on those of you with far greater knowledge than I to afford me some advice. I have attached a photo of the windows in question.
Mercedes 1316 Custom Coach Body - Side Window Window Seals
Moderator: MAN 16.242
Forum rules
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
Mercedes 1316 Custom Coach Body - Side Window Window Seals
- Attachments
-
- window.PNG (215.06 KiB) Viewed 6850 times
Re: Mercedes 1316 Custom Coach Body - Side Window Window Sea
i've got a custom coaches step deck body with those windows and its a 1 piece rubber seal which goes around the whole window
Re: Mercedes 1316 Custom Coach Body - Side Window Window Sea
Thanks ax8, I might go direct to them and ask.
- DiAmOnD T
- Posts: 976
- Joined: Thu Oct 07, 2004 2:11 pm
- Favourite Vehicle: AEC Mandator Ex Browns no7
- Location: under the subway at 'the main
Re: Mercedes 1316 Custom Coach Body - Side Window Window Sea
For the lower fixed pane section off memory is a single rubber. you need to remove the slider windows then undo the screws that hold the window track in to be able to remove that glass
Re: Mercedes 1316 Custom Coach Body - Side Window Window Sea
Thanks for all the info. I am still chasing a price on the rubbers.
On another matter but related to the windows, does anyone know of replacement windows that either slide or pushout for increased air flow? I am wanting them to fit the same cut out if possible. I know its a big ask as the existing windows have the angled sides. Its worth an ask to see what people have to say!
On another matter but related to the windows, does anyone know of replacement windows that either slide or pushout for increased air flow? I am wanting them to fit the same cut out if possible. I know its a big ask as the existing windows have the angled sides. Its worth an ask to see what people have to say!