Bustech Destos
Moderator: MAN 16.242
Forum rules
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###
- Tomas.Norton
- Posts: 6
- Joined: Wed Aug 18, 2010 6:07 pm
- Location: Sunshine Coast, QLD
- Contact:
Bustech Destos
Hey all,
I've got my hands on the Mobitec MIE software, and wanted to mock up the destos on the local buses (Sunbus Sunshine Coast).
Just wondering if anyone knows the specification for both the front and kerb-side Mobitec used on Bustech vehicles? (Like LED's/dots across by LED's/dots down)
I just can't seem to get them to look right...
Thanks
I've got my hands on the Mobitec MIE software, and wanted to mock up the destos on the local buses (Sunbus Sunshine Coast).
Just wondering if anyone knows the specification for both the front and kerb-side Mobitec used on Bustech vehicles? (Like LED's/dots across by LED's/dots down)
I just can't seem to get them to look right...
Thanks
Re: Bustech Destos
The Bustech front and side desto size
Front LED is 144 long by 19 high
Side LED is a 144 long and 16 high, the same sign file is used on both.
Front LED is 144 long by 19 high
Side LED is a 144 long and 16 high, the same sign file is used on both.
- Set Down Only
- Posts: 1164
- Joined: Mon Aug 21, 2006 2:28 pm
- Favourite Vehicle: Surfside 332
- Contact:
Re: Bustech Destos
Not 140x19/140x16?
Express - Set Down Only.
Joined the 1000 club 8/7/11
Bus models - stevesmodelbuses@yahoo.com
'I Did Double Decker Day 1'
Joined the 1000 club 8/7/11
Bus models - stevesmodelbuses@yahoo.com
'I Did Double Decker Day 1'
- Two-Way
- Posts: 957
- Joined: Sun Aug 30, 2009 8:40 pm
- Favourite Vehicle: Simoco SRM-9000
- Location: In your dashboard
Re: Bustech Destos
Definately 140, not 144
Would you have a look at that K-Whopper hallin' that Wriggle Wagon hes got it to the floor and looking for more!
Posts here are my opinions and thoughts only.
Posts here are my opinions and thoughts only.
Re: Bustech Destos
Buttons too close
- Tomas.Norton
- Posts: 6
- Joined: Wed Aug 18, 2010 6:07 pm
- Location: Sunshine Coast, QLD
- Contact:
Re: Bustech Destos
Hate to bump an old topic (especially since it isn't exactly on the same issue).
Just curious if any one you guys also know the programming dimensions for the Hanover destos in the Bustechs, or the Mobi Dot destos in the CB20's?
Got no clue about the CB20 size, but are the Hanover ones the same size and the Mobi LEDs?
Just curious if any one you guys also know the programming dimensions for the Hanover destos in the Bustechs, or the Mobi Dot destos in the CB20's?
Got no clue about the CB20 size, but are the Hanover ones the same size and the Mobi LEDs?
- Set Down Only
- Posts: 1164
- Joined: Mon Aug 21, 2006 2:28 pm
- Favourite Vehicle: Surfside 332
- Contact:
Re: Bustech Destos
Hanovers are
144 x 19 Front
96 x 15 Side
the Surfside CB20s i believe are 98 x 13 but i don't know if the rest are the same.
144 x 19 Front
96 x 15 Side
the Surfside CB20s i believe are 98 x 13 but i don't know if the rest are the same.
Express - Set Down Only.
Joined the 1000 club 8/7/11
Bus models - stevesmodelbuses@yahoo.com
'I Did Double Decker Day 1'
Joined the 1000 club 8/7/11
Bus models - stevesmodelbuses@yahoo.com
'I Did Double Decker Day 1'
- Southport_18
- Posts: 1
- Joined: Fri Feb 10, 2012 9:30 pm
- Favourite Vehicle: Bustech VST, XDi & CDI
Re: Bustech Destos
Hi everyone
for months now i've been looking to get MIE software for some destos but i can't find it anywhere could someone please send me a link to download it or a website address
thanks
for months now i've been looking to get MIE software for some destos but i can't find it anywhere could someone please send me a link to download it or a website address
thanks
Re: Bustech Destos
The sizes I use on the Townsville fleet (Bustech) are 112x16 (front) and 84x13 (side) for the LED signs. These sizes are a bit smaller than the actual screen but make the task a little easier.
For the flip-dot signs the sizes are 98x16 (front) and 84x16 (side, and where applicable, rear). Of course you could make them ALL 98x13/84x13 and use the one file for all the destos but doing that would reduce (again) the amount of info you could display on the larger LED screens.
These sizes are in everday use in the Sunbus Townsville fleet and work just fine.
For the flip-dot signs the sizes are 98x16 (front) and 84x16 (side, and where applicable, rear). Of course you could make them ALL 98x13/84x13 and use the one file for all the destos but doing that would reduce (again) the amount of info you could display on the larger LED screens.
These sizes are in everday use in the Sunbus Townsville fleet and work just fine.
Cheers... Kev
- AirBusTrain
- Posts: 109
- Joined: Mon Jun 13, 2016 9:33 pm
- Favourite Vehicle: VSTs and Commodores.
- Location: Chinatown
- Contact:
Re: Bustech Destos
Sunbus 5533 desto for i know is 98x19 i think if ur still looking mate.Tomas.Norton wrote:Got no clue about the CB20 size, but are the Hanover ones the same size and the Mobi LEDs?
I like big bus and I can not lie.