• Advertisement

Bustech Destos

New Users (or anyone else) is/are welcome to ask questions in here to which the answers might be obvious to most but you simply don't know yourself or are unsure where to find the answer. You can also ask questions about the working of the forum or anything else you may think of.

Moderator: MAN 16.242

Forum rules
### This section is a NO FLAMING ZONE! That means you cannot reply "harshly", abusively, sarcastically or in any negative manner to members. ###

Bustech Destos

Postby Tomas.Norton » Thu Dec 01, 2011 11:14 pm

Hey all,
I've got my hands on the Mobitec MIE software, and wanted to mock up the destos on the local buses (Sunbus Sunshine Coast).
Just wondering if anyone knows the specification for both the front and kerb-side Mobitec used on Bustech vehicles? (Like LED's/dots across by LED's/dots down)
I just can't seem to get them to look right... :(

Thanks
Tomas.Norton
 
Posts: 4
Joined: Wed Aug 18, 2010 6:07 pm
Location: Sunshine Coast, QLD
Has thanked: 0 time
Been thanked: 0 time
Favourite Vehicle: Anything Bustech!

Re: Bustech Destos

Postby Scrot » Fri Dec 09, 2011 4:10 pm

The Bustech front and side desto size

Front LED is 144 long by 19 high

Side LED is a 144 long and 16 high, the same sign file is used on both.
Scrot
 
Posts: 9
Joined: Sat Dec 15, 2007 9:49 pm
Location: Queensland
Has thanked: 0 time
Been thanked: 0 time
Favourite Vehicle: BUSTECH

Re: Bustech Destos

Postby Set Down Only » Fri Dec 09, 2011 7:21 pm

Not 140x19/140x16?
Express - Set Down Only.
Joined the 1000 club 8/7/11
Bus models - stevesmodelbuses@yahoo.com

'I Did Double Decker Day 1'
User avatar
Set Down Only
 
Posts: 1164
Joined: Mon Aug 21, 2006 2:28 pm
Has thanked: 3 times
Been thanked: 1 time
Favourite Vehicle: Surfside 332

Re: Bustech Destos

Postby Two-Way » Fri Dec 09, 2011 11:06 pm

Definately 140, not 144
Would you have a look at that K-Whopper hallin' that Wriggle Wagon hes got it to the floor and looking for more!
Posts here are my opinions and thoughts only.
User avatar
Two-Way
 
Posts: 957
Joined: Sun Aug 30, 2009 8:40 pm
Location: In your dashboard
Has thanked: 6 times
Been thanked: 67 times
Favourite Vehicle: Simoco SRM-9000

Re: Bustech Destos

Postby Scrot » Fri Dec 09, 2011 11:23 pm

Buttons too close
Scrot
 
Posts: 9
Joined: Sat Dec 15, 2007 9:49 pm
Location: Queensland
Has thanked: 0 time
Been thanked: 0 time
Favourite Vehicle: BUSTECH

Re: Bustech Destos

Postby Tomas.Norton » Sat Apr 21, 2012 11:29 pm

Hate to bump an old topic (especially since it isn't exactly on the same issue).
Just curious if any one you guys also know the programming dimensions for the Hanover destos in the Bustechs, or the Mobi Dot destos in the CB20's?

Got no clue about the CB20 size, but are the Hanover ones the same size and the Mobi LEDs?
Tomas.Norton
 
Posts: 4
Joined: Wed Aug 18, 2010 6:07 pm
Location: Sunshine Coast, QLD
Has thanked: 0 time
Been thanked: 0 time
Favourite Vehicle: Anything Bustech!

Re: Bustech Destos

Postby Set Down Only » Sun Apr 22, 2012 10:46 am

Hanovers are
144 x 19 Front
96 x 15 Side

the Surfside CB20s i believe are 98 x 13 but i don't know if the rest are the same.
Express - Set Down Only.
Joined the 1000 club 8/7/11
Bus models - stevesmodelbuses@yahoo.com

'I Did Double Decker Day 1'
User avatar
Set Down Only
 
Posts: 1164
Joined: Mon Aug 21, 2006 2:28 pm
Has thanked: 3 times
Been thanked: 1 time
Favourite Vehicle: Surfside 332

Re: Bustech Destos

Postby Southport_18 » Sun May 13, 2012 8:57 am

Hi everyone

for months now i've been looking to get MIE software for some destos but i can't find it anywhere :?: could someone please send me a link to download it or a website address

thanks :D
User avatar
Southport_18
 
Posts: 1
Joined: Fri Feb 10, 2012 8:30 pm
Has thanked: 0 time
Been thanked: 0 time
Favourite Vehicle: Bustech VST, XDi & CDI

Re: Bustech Destos

Postby kev1952 » Fri May 18, 2012 12:28 am

The sizes I use on the Townsville fleet (Bustech) are 112x16 (front) and 84x13 (side) for the LED signs. These sizes are a bit smaller than the actual screen but make the task a little easier.

For the flip-dot signs the sizes are 98x16 (front) and 84x16 (side, and where applicable, rear). Of course you could make them ALL 98x13/84x13 and use the one file for all the destos but doing that would reduce (again) the amount of info you could display on the larger LED screens.

These sizes are in everday use in the Sunbus Townsville fleet and work just fine. :D
Cheers... Kev
User avatar
kev1952
 
Posts: 10
Joined: Fri Nov 11, 2011 3:41 am
Has thanked: 0 time
Been thanked: 0 time

Re: Bustech Destos

Postby VaultMedia » Wed Aug 02, 2017 9:34 pm

Tomas.Norton wrote:Got no clue about the CB20 size, but are the Hanover ones the same size and the Mobi LEDs?


Sunbus 5533 desto for i know is 98x19 i think if ur still looking mate.
Noosa Junction station is my second home. :lol:
User avatar
VaultMedia
 
Posts: 14
Joined: Mon Jun 13, 2016 9:33 pm
Location: Noosa
Has thanked: 2 times
Been thanked: 0 time
Favourite Vehicle: B12BLE VST



  • Advertisement

Return to New Users/Ask a Simple Question

Who is online

Users browsing this forum: No registered users and 3 guests